Transfer Valve
![]() |
Valve installation profiles, valve installation and maintenance guide
SOLDERING AND SILVER BRAZING
¡¡¡¡Analyze the application to determine which valve is best suited for installations, keeping in mind the service for which the valve is recommended. Before installing the correct valve, review the installation instructions to prevent damage to the valve and to assure its maximum efficiency.
1.Cut tube end square. Ream, burr and size.
2. Use sand cloth or steel wire brush to clean both ends to a bright metal finish. Steel wool is notrecommended.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
4.Be sure that valve is fully open. Apply heat to tube first. Transfer as much heat as possible through tube into valve. Avoid
prolonged heating of valve itself.
5.Silver Brazing Method: Assemble parts to be brazed. If fluxed parts are allowed to stand, the water in the flux will evaporate, and dried flux is liable to flake off, exposing metal surfaces to oxidation. Assemble joint by inserting tube into socket hard against the stop. The assembly should be firmly supported so that it will remain in alignment during the brazing operation.
¡¡¡¡NOTE: On one-inch and larger valves, it is difficult to bring the whole joint up to temperature at one time. It will frequently be found desirable to use a double-tip torch to maintain the proper temperature over the larger area. A mild pre-heating of the whole socket area is recommended. Apply heat to parts to be joined. The preferred method is by oxy-acetylene flame. Heat tube first, beginning one inch from edge of valve. Sweep flame around tube in short strokes up and down at right angles to run of tube. To avoid burning through tube, the flame should be in continuous motion and not allowed to remain on any one point.
Apply flame to valve at base of socket. Heat uniformly, sweeping flame from valve to tube until flux on valve becomes quiet. Avoid excessive heating of valve.
¡¡¡¡When flux appears liquid and transparent on both tube and valve, start sweeping flame back and forth along axis of joint to maintain heat on parts to be joined, especially toward base of valve socket.
6. Use just enough solder: with wire solder, use 3/4" for a 3/4" valve, etc. If too much solder is used, it may flow past tube stop and clog sealing area. When joint is filled, a continuous run of solder or brazing alloy will be visible.
7. Silver Brazing Method: Apply brazing wire or rod at point where tube enters valve socket. Keep flame away from rod or wire as it is fed into the joint. Move flame back and forth as alloy is drawn into joint. When the proper temperature is reached alloy will flow readily into space between tube outer wall and valve socket. When joint is filled, a continuous rim of brazing alloy will be visible.
8. Remove excess solder with small brush while plastic, leaving a fillet around end of valve as it cools.
SILVER BRAZING¡¡¡¡
¡¡¡¡The strength of a brazed joint does not vary appreciably with the different brazing materials, but depends to a large extent upon the maintenance of proper clearance between the outside of the tube and the valve socket. The interior dimensions of silver brazing valve sockets are machined to the closest tolerances and finished smooth to promote full capillary attraction.
¡¡¡¡NOTE: Care should be observed in cleaning and in removing residues of the cleaning medium. Attempting to braze a contaminated or improperly cleaned surface will result in an unsatisfactory joint. Silver brazing alloys will not flow over or bond to oxides. Oily or greasy surfaces repel fluxes, leaving bare spots which oxidize and result in voids and inclusions.
THREADING
¡¡Grit, dirt or any foreign matter accumulated in the pipe can hinder efficient valve operation and seriously damage vital valve parts. Thoroughly clean pipe internally with air or steam.
¡¡¡¡When threading pipe, gauge pipe threads for size and length to avoid jamming pipe against seat and disc. Thoroughly clean threaded end to remove any harmful steel or iron deposits. For a good joint, use teflon tape or pipe dope. If pipe dope is used, apply sparingly on pipe threads, neveron valve threads. Do not allow any pipe dope into valve body in order to avoid damage to disc and seat.
¡¡¡¡Before installation, check line of flow through valve so that valve will function properly. Close valve completely before installation. Apply wrench to hex next to pipe and guard against possible distortion. After installation of valve, support line; a sagging pipe line can distort valve and cause failure.
FLANGED
¡¡¡¡There are several steps to follow to make sure that a flanged joint will be properly assembled. First, clean the joint carefully. Then loosely assemble the joint by putting in the bottom two or three bolts. Then carefully insert the gasket into place. The bottom bolts will help locate the gasket and hold it in position. Then insert the rest of the bolts into place and tighten all of the bolts evenly-not in rotation, but by the cross-over method to load the bolts evenly and eliminate concentrated stresses. The bolts should be checked for tightness after an appropriate interval of use and retightened if nec .
All rights reserved by FBIC Inc., do remember to show the source (www.fsbic.com) of the news when copying
About the Author
FBIC Inc., a member of Siduona group in flow-control business, has over 15 year experience in manufacturing ball valve, gate valve, globe valve, check check valve, plug valve and butterfly valve in carbon steel, stainless steel Valve.
|
|
American Standard M9616380070A Transfer Valve Seal Kit $20.46 Transfer Valve Seal Kit. |
|
|
American Standard 0123250070A Transfer Valve Seal Kit $24.61 Transfer Valve Seal Kit. |
|
|
American Standard 0307500070A Transfer Valve Seal Kit $20.33 Transfer Valve Seal Kit. |
|
|
American Standard 0336840070A Transfer Valve Kit $86.31 Transfer Valve Kit. |
|
|
Model 104424: Five Function Transfer Valve $79 1" handle extension kit, 5 function transfer valve |
|
|
3372 Transfer 1/2 CC $87 Rough-In Valve Transfer 12 CC connection - 3372 |
|
|
Model T109444: Stillness� ADA Transfer Valve Trim - Polished Chrome $175 Stillness� transfer valve trim with lever handle. Streamlined elements and understated sophistication are the essence of Stillness� faucets. Paired with a 3-way transfer valve, this Stillness 3-way transfer valve trim allows you to choose from six different outputs and direct the water exactly where you want it. Its pared-down approach to design is an ideal accompaniment to contemporary showering environments. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model T109444: Stillness� ADA Transfer Valve Trim - Vibrant Brushed Nickel $247 Stillness� transfer valve trim with lever handle. Streamlined elements and understated sophistication are the essence of Stillness� faucets. Paired with a 3-way transfer valve, this Stillness 3-way transfer valve trim allows you to choose from six different outputs and direct the water exactly where you want it. Its pared-down approach to design is an ideal accompaniment to contemporary showering environments. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model T161784A: Revival� ADA Transfer Valve Trim - Polished Chrome $147 Revival� transfer valve trim with traditional lever handle. Blending European style and early American influences, Revival faucets feature scroll or traditional lever handles. Elegant accents bring continuity to your room design. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model T121894: Fairfax� ADA Transfer Valve Trim - Polished Chrome $123 Fairfax� transfer valve trim. Fairfax faucets blend classic style with the ease of single-handle operation for a unique look. The graceful curves of this affordable faucet are reminiscent of designs from the early 1900s. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model T161784A: Revival� ADA Transfer Valve Trim - Vibrant Brushed Nickel $206 Revival� transfer valve trim with traditional lever handle. Blending European style and early American influences, Revival faucets feature scroll or traditional lever handles. Elegant accents bring continuity to your room design. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model T3764: Devonshire� ADA Transfer Valve Trim - Vibrant Brushed Nickel $164 Devonshire� transfer valve trim. Capturing the elegance of a bygone era, Devonshire is reminiscent of old-world design. The simple, striking combination of curves and lines adds refinement and distinctive visual impact to bath and powder rooms. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model T3764: Devonshire� ADA Transfer Valve Trim - Polished Chrome $116 Devonshire� transfer valve trim. Capturing the elegance of a bygone era, Devonshire is reminiscent of old-world design. The simple, striking combination of curves and lines adds refinement and distinctive visual impact to bath and powder rooms. - Patented Model joint installation ensures consistent trim appearance, regardless of variability in valve rough-in - Ergonomic lever handle is ADA-compliant - Trim requires valve to complete - ADDITIONAL ITEMS REQUIRED - Model 672-K: MasterShower� 3/4" 3-way transfer valve |
|
|
Model 409K: Deck-mount Transfer Valve/vacuum Breaker $232 (Photo shows deck-mount transfer valve/vaccum breaker.) Deck-mount transfer valve/vacuum breaker. Turn your bath into a shower with this valve/vacuum breaker. Simply add this to your bath faucetry and you�ve got a deck-mounted handshower. - Allows a deck-mount handshower to be installed with bath faucetry - Professional installation recommended. |
|
|
Alsons 4940Bx Transfer Valve With 24Inch Interlink Hose#44; Chrome SDDALS1172 $239.8 Transfer valve with metal handle for deck mount or extended wall installation. 1/2Inch connections. 24Inch high pressure interlink supply hose. Metal lever handle. Chrome finish. |
|
|
Model 408K: Bath-mount Transfer Valve/vacuum Breaker $232 Bath-mount transfer valve/vacuum breaker. Turn your bath into a shower with this valve/vacuum breaker. Simply add this to your bath faucetry and you�ve got a bath-mounted handshower. - Allows a bath-mount handshower to be installed with bath faucetry - Professional installation recommended. |
|
|
Kohler K-408-K-NA Bath-Mount Transfer Check Valve $313.27 The Kohler K-408-K-NA Bath-Mount Transfer Check Valve is designed to fashionably match your decor. The K-408-K-NA features solid brass construction for durability and reliability.Faucet Type: Bath-mount transfer check valveFaucet Finish: NAAllows a bath-mount handshower to be installed with bath faucetryab1953 certified |
|
|
Kohler K-T10058-9-BN Vibrant Brushed Nickel Oblo Transfer Valve Trim, Valve Not Included $270.5 The Kohler K-T10058-9-BN Vibrant Brushed Nickel Oblo Transfer Valve Trim, Valve Not Included is designed to fashionably match your decor. The K-T10058-9-BN features solid brass construction for durability and reliability.Faucet Type: Oblo transfer valve trim, valve not includedFaucet Finish: Vibrant Brushed NickelPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inTrim requires valve to completeFresh, elegant design perfect solution for sleek, modern interiorsab1953 certified |
|
|
Model T95404: Bath- Or Deck-mount Transfer Valve/vacuum Breaker Trim - Vibrant Polished Brass $298 Bath- or deck-mount transfer valve/vacuum breaker with lever handle. Offering convenience, quality and style at a competitive price, this Coralais bath- or deck-mount transfer valve/vacuum breaker trim brings sleek design continuity to the bath. A lever handle completes the look. - Solid brass construction ensures years of reliable performance - ADDITIONAL ITEMS REQUIRED - Model 408-K: Bath-mount transfer valve/vacuum breaker - Model 409-K: Deck-mount transfer valve/vacuum breaker |
|
|
Model T95404: Bath- Or Deck-mount Transfer Valve/vacuum Breaker Trim - Polished Chrome $221 Bath- or deck-mount transfer valve/vacuum breaker with lever handle. Offering convenience, quality and style at a competitive price, this Coralais bath- or deck-mount transfer valve/vacuum breaker trim brings sleek design continuity to the bath. A lever handle completes the look. - Solid brass construction ensures years of reliable performance - ADDITIONAL ITEMS REQUIRED - Model 408-K: Bath-mount transfer valve/vacuum breaker - Model 409-K: Deck-mount transfer valve/vacuum breaker |
|
|
Model T95407: Bath- Or Deck-mount Transfer Valve/vacuum Breaker Trim - Polished Chrome $194 (Photo shows bath- or deck-mount transfer valve/vacuum breaker trim.) Bath- or deck-mount transfer valve/vacuum breaker with cylinder handle. This bath- or deck-mount trim for transfer valve/vacuum breaker is made of solid brass construction for years of reliable performance, and features a cylinder handle. - Solid brass construction ensures years of reliable performance - Cylinder handle - ADDITIONAL ITEMS REQUIRED - Model 408-K: Bath-mount transfer valve/vacuum breaker - Model 409-K: Deck-mount transfer valve/vacuum breaker |
|
|
Kohler K-T376-4-BRZ Oil Rubbed Bronze Transfer Valve Trim $247.7 The Kohler K-T376-4-BRZ Oil Rubbed Bronze Transfer Valve Trim is designed to fashionably match your decor. The K-T376-4-BRZ features solid brass construction for durability and reliability.Faucet Type: Number of Handles: Singe-HandleFaucet Finish: Oil Rubbed BronzeHandle Shape: LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10944-4-BN Vibrant Brushed Nickel Stillness Transfer Valve Trim With Lever Handle, Valve Not Included $309.86 The Kohler K-T10944-4-BN Vibrant Brushed Nickel Stillness Transfer Valve Trim With Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10944-4-BN features solid brass construction for durability and reliability.Faucet Type: Stillness transfer valve trim with lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed NickelHandle Shape: BladePatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10944-4-CP Polished Chrome Stillness Transfer Valve Trim With Lever Handle, Valve Not Included $226.39 The Kohler K-T10944-4-CP Polished Chrome Stillness Transfer Valve Trim With Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10944-4-CP features solid brass construction for durability and reliability.Faucet Type: Stillness transfer valve trim with lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Polished ChromeHandle Shape: BladePatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10290-4-G Brushed Chrome Forte Transfer Valve Trim, Valve Not Included $199.57 The Kohler K-T10290-4-G Brushed Chrome Forte Transfer Valve Trim, Valve Not Included is designed to fashionably match your decor. The K-T10290-4-G features solid brass construction for durability and reliability.Faucet Type: Forte transfer valve trim, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Brushed ChromeHandle Shape: Sculpted LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T12189-4-BN Vibrant Brushed Nickel Fairfax Transfer Valve Trim, Valve Not Included $232.21 The Kohler K-T12189-4-BN Vibrant Brushed Nickel Fairfax Transfer Valve Trim, Valve Not Included is designed to fashionably match your decor. The K-T12189-4-BN features solid brass construction for durability and reliability.Faucet Type: Fairfax transfer valve trim, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed NickelHandle Shape: LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10304-4M-BN Vibrant Brushed Nickel Finial Traditional Transfer Valve Trim With Lever Handle, Valve Not Included $457.83 The Kohler K-T10304-4M-BN Vibrant Brushed Nickel Finial Traditional Transfer Valve Trim With Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10304-4M-BN features solid brass construction for durability and reliability.Faucet Type: Finial Traditional transfer valve trim with lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed NickelHandle Shape: Traditional LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10304-4M-BV Vibrant Brushed Bronze Finial Traditional Transfer Valve Trim With Lever Handle, Valve Not Included $416.99 The Kohler K-T10304-4M-BV Vibrant Brushed Bronze Finial Traditional Transfer Valve Trim With Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10304-4M-BV features solid brass construction for durability and reliability.Faucet Type: Finial Traditional transfer valve trim with lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed BronzeHandle Shape: Traditional LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10304-4M-SN Vibrant Polished Nickel Finial Traditional Transfer Valve Trim With Lever Handle, Valve Not Included $494.76 The Kohler K-T10304-4M-SN Vibrant Polished Nickel Finial Traditional Transfer Valve Trim With Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10304-4M-SN features solid brass construction for durability and reliability.Faucet Type: Finial Traditional transfer valve trim with lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Polished NickelHandle Shape: Traditional LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10424-4V-BV Vibrant Brushed Bronze Memoirs Transfer Valve Trim With Stately Design And Deco Lever Handle, Valve Not In $318.88 The Kohler K-T10424-4V-BV Vibrant Brushed Bronze Memoirs Transfer Valve Trim With Stately Design And Deco Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10424-4V-BV features solid brass construction for durability and reliability.Faucet Type: Memoirs transfer valve trim with Stately design and Deco lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed BronzeHandle Shape: Deco LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T14491-3-CP Polished Chrome Purist Transfer Valve Trim With Cross Handle, Valve Not Included $201.76 The Kohler K-T14491-3-CP Polished Chrome Purist Transfer Valve Trim With Cross Handle, Valve Not Included is designed to fashionably match your decor. The K-T14491-3-CP features solid brass construction for durability and reliability.Faucet Type: Purist transfer valve trim with cross handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Polished ChromeHandle Shape: CrossPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T14491-4-SN Vibrant Polished Nickel Purist Transfer Valve Trim With Cross Handle, Valve Not Included $272.4 The Kohler K-T14491-4-SN Vibrant Polished Nickel Purist Transfer Valve Trim With Cross Handle, Valve Not Included is designed to fashionably match your decor. The K-T14491-4-SN features solid brass construction for durability and reliability.Faucet Type: Purist transfer valve trim with cross handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Polished NickelHandle Shape: LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10595-4-BN Vibrant Brushed Nickel Bancroft Transfer Valve Trim With Metal Lever Handle, Valve Not Included $270.46 The Kohler K-T10595-4-BN Vibrant Brushed Nickel Bancroft Transfer Valve Trim With Metal Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10595-4-BN features solid brass construction for durability and reliability.Faucet Type: Bancroft transfer valve trim with metal lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed NickelHandle Shape: Metal LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
|
|
Kohler K-T10595-4P-BN Vibrant Brushed Nickel Bancroft Transfer Valve Trim With White Ceramic Lever Handle, Valve Not Included $264.83 The Kohler K-T10595-4P-BN Vibrant Brushed Nickel Bancroft Transfer Valve Trim With White Ceramic Lever Handle, Valve Not Included is designed to fashionably match your decor. The K-T10595-4P-BN features solid brass construction for durability and reliability.Faucet Type: Bancroft transfer valve trim with White ceramic lever handle, valve not includedNumber of Handles: Singe-HandleFaucet Finish: Vibrant Brushed NickelHandle Shape: Ceramic LeverPatented K-joint installation ensures consistent trim appearance, regardless of variability in valve rough-inErgonomic lever handle is ADA-compliantTrim requires valve to completeab1953 certified |
Tags: 3 function transfer valve, electronics, kohler, kohler transfer valve, moen transfer valve, shower, transfer, transfer valve, transfer valve shower, valve


US $1,102.11
















































![Transfer Valve From English Electric Canberra Aircraft No WH734 R4A8]](http://www.rockpre.com/images/e/130669981709_0.jpg)













































