Sign Deck
 |
US $41.00
11 Keys to Stain Your Deck Like A Pro
Copyright (c) 2009 SaverSystems
Having spent my entire adult life working with paints and stains, it didn't take long for me to figure out that homeowners who stain their own decks, for the most part end up dissatisfied with their project. After all of their hard work, the stain doesn't hold up, and almost overnight their beautiful project again begins to weather from nature's elements. No matter what they have tried, the result is always the same...a lousy looking deck that seems to always look like it needs a little attention. The solution however, is not all that difficult. If you want your deck to look like a pro did it, then follow these 11 keys to success that will guarantee you'll end up with a great looking deck.
1. Take Your Time
When the project is completed, nothing will have had a greater impact on the quality of the job than this. Allow new pressure treated lumber to weather for a few months to dry out before staining. Allow any stain strippers that you're using to be left on the surface long enough to break down that old finish before you rinse it off. Take your time to not slop stain over anything that gets in your way and wait to start your project until the weather forecast is favorable. Bottom line: take your time to do it right!
2. Preparation, Preparation, Preparation
Preparation is key to the final result. All wood needs to be cleaned well before staining, whether it's a brand new deck or an older, weathered deck. Brand new lumber needs to be cleaned to remove "mill scale". Mill scale is a crushing of the grain in the wood that takes place during the milling process. If new wood is not cleaned, it can prevent stains from properly penetrating into the wood's surface.
If you have an older deck, dirt, graying from the sun, mildew and previous stains all need to be removed prior to re-staining. Sodium percarbonate cleaners, also known as oxygenated bleaches, are a great choice for this step. They are highly effective at cleaning the wood, yet won't harm plant life and vegetation. They won't hurt you either. Their soapy consistency won't burn your skin.
If there is a build-up of old stains on the deck, instead of a sodium percarbonate cleaner you'll need to use a stain stripper. Strippers are a little more caustic so follow the directions carefully. They work great and will remove most weathered stains in a single application.
If there are small spots of stain that won't come off during the cleaning process, they should sand off fairly easily using a palm-type sander after the wood has dried. If those spots of stain are left on the deck, they will show through the new finish and detract from the deck's final appearance.
3. Brighteners Are Beautiful
In the deck staining process, no step is skipped more often than this one, yet it is by far the easiest to do and will have a dramatic effect on the final results. Brighteners help open up the surface of the wood to improve penetration. They neutralize any stain strippers that were used and they restore the appearance of old, weathered wood to a brand new look. That's a lot of things for one product to accomplish so don't skip the brighteners. Brighteners are easy to use. Simply spray them on, wait a few minutes, and rinse them off. No scrubbing or "elbow grease" needed.
4. Rinse Like Mad
Use lots of water after using any cleaning chemicals. These chemicals can be safe and harmless, but they need to be rinsed off extremely well after they are used. Left in the wood, they can resurface over time and break down the new stain. So once you are done cleaning, rinse the deck thoroughly to get all of the chemicals out of the wood.
5. Stay Away From the Cheap Stuff
The deck is clean, dry and ready to be stained. Now is not the time to skimp. When you are deciding which stain to use, stay away from the cheap stuff! You always get what you pay for. Better ingredients cost more money. If you expect premium results then you'll need to buy a premium product. There is a difference in quality when it comes to resins, pigments, mildewcides and many of the other materials that make up a gallon of wood stain. So stay away from the cheap stuff if you expect it to last.
6. Take a Look at Waterborne Stains
Water based stain stain technology has made vast improvements over the years as air quality regulations have forced manufacturers to really focus on and improve these products. In the recent years they have become better, more durable and longer lasting than conventional oil-based alternatives. So if you have been reluctant to look at them in the past, don't be reluctant any longer.
Water based stains offer some real advantages. They clean up with soap and water, there are no nasty solvents to breathe and they have significantly better resistance to weather. Also, the wood doesn't need to be completely dry to use them, they dry more quickly than solvents and they are much easier on good old mother earth. In addition, some of the waterborne stains are synthetic as well, such as the Defy brand. Synthetic stains are far less susceptible to the growth of mold, mildew and algae. If you're in an area with a fair amount of moisture and humidity, a waterborne synthetic stain offers a big advantage.
7. Read the Can...Follow the Directions
Every product can be a little different so always read the label for directions. It only takes a few minutes but it will ensure that you have all of the right information before you get started. Pay attention to information such as how many coats of stain to apply, how long to wait between coats, how long to wait after cleaning and how long to allow the wood to weather. Read the label first and you'll likely get it right the first time.
8. More IS NOT Always Better
Decks are best stained with a semi-transparent stain. These stains allow the natural grain of the wood to show through and allow the wood to naturally breathe vapor through it. As semi-transparent stains weather, they can easily be reapplied. Pay attention to the manufacturer's directions and don't over-apply these products. You'll end up with a shiny finish that will probably peel off over time. When too much stained is applied, a film can form, much like paint, that will no longer allow vapor to pass through it. When this happens, peeling can result and that's a real mess. Only apply as much stain as the wood can easily absorb.
9. The Paint Brush Is Still King
There are a lot of different ways to apply deck stains. Using a sprayer and roller are two popular methods. Regardless of how you apply it, always keep a paint brush at hand. The agitation and friction caused by a paint brush will work the stain deep into the pores of the wood. Always back-brush it while the stain is still wet and you'll achieve much better penetration into the wood.
10. Give It Time To Dry
I told you at the start of this article to take your time. When your project is finally done, take a little extra time before you start using it. Let your deck dry out good before putting it back in use. The stain needs to cure out before subjecting it to the rigors of patio furniture and foot traffic.
11. How About A Little Maintenance
A small amount of effort can keep your deck looking great longer. Just as you would wash the dirt off of your car, wash down the surface of your deck every now and then to keep leaves and dirt from damaging the finish. If the deck stain starts to show signs of graying or loosing its color, it can be easily cleaned up with a little wood brightener and a light maintenance coat of stain.
Helpful Tips
When staining the deck, you can speed the process by using a soft-bristle scrub brush on the horizontal boards. These brushes can be found in the cleaning section of most home improvement stores. Get the type that can be attached to a 4 foot extension pole and staining your deck will go much faster.
When staining the deck rails take care not to splatter stain on the deck surface below as it will most likely leave unsightly darker spots. The easiest way to avoid this problem is to cover the deck below the rails as you work. I use the cardboard from the box the stain came in and cut out notches in the cardboard so it will fit snugly around the rail posts.
About the Author
Dave Barnes is a 30-year veteran and nationally recognized product expert of the paint and coatings industry. He has worked in multiple capacities within the business, including having key responsibilities with both product formulations and field application design. He currently serves as Executive Vice-President for SaverSystems Inc., a manufacturer of water repellents for concrete, masonry and wood deck sealers.
|
|
Deck the Stalls Metal Sign $22.95 Give your horses a little holiday spirit when you deck the stalls this season! Sign is made from individual metal panels, handpainted in a distressed and vintage style. Each panel is attached to the others by small chains. Hangs 27" in length. |
|
|
Sign $10 Sign |
|
|
In The Sign $8.49 In The Sign |
|
|
Zigmund Palffy autographed Hockey Card (Los Angeles Kings) 2002 Upper Deck sign of the times #ZP $25.5 Zigmund Palffy autographed Hockey Card (Los Angeles Kings) 2002 Upper Deck sign of the times #ZP Zigmund Palffy autographed Hockey Card (Los Angeles Kings) 2002 Upper Deck sign of the times #ZP. Item comes fully certified with a tamper-evident, serialized hologram and certificate of authenticity. |
|
|
US Officers Line Deck of USS Missouri as Japanese Delegation Prepares to Sign Surrender Documents $79.99 Carl Mydans US Officers Line Deck of USS Missouri as Japanese Delegation Prepares to Sign Surrender Documents - Premium Photographic Print |
|
|
Beistle 54312 Neon Buffet Sign Pack of 24 $36.04 Set the deck for your cruise ship theme party with this Neon Buffet Sign. The Neon Buffet Sign is perfect for transforming your party room into a cruise ship deck. Let your passengers know where they can find their dinner by displaying this Neon Buffet Sign. The Neon Buffet Sign can be used for decorating a Casino theme party as well. Between gambling its always nice to have a bite to eat so direct your party guests there wit the Neon Buffet Sign. 1 Per package. Material: Cardstock. Printed 2 sides. Theme: Casino. Size: 8 x 22 . |
|
|
On Deck $24.99 Chaloner Woods On Deck - Photographic Print |
|
|
The Deck $8.99 Dan Dipaolo The Deck - Art Print |
|
|
Baby Sign Language Basics Flash Cards : A Deck of 50 American Sign Language (ASL) Cards $11.01 No Synopsis Available |
|
|
Dream Fairies Inspirational Deck (Paperback) $33.24 Unravel the mysteries of your dreams with the wisdom of the stars. The Dream Fairies Inspirational Deck promises an enlightening inner journey guided by twelve breathtakingly beautiful fairies, each representing a sign of the zodiac. Evoking the ephemeral, emotionally rich essense of our dreamlife, this unique deck can help you gain rare access to your subconscious, where hidden talents, unspoken hopes, and unfulfilled desires can finally be awakened. Glow in the dark imagery allow you to enjoy the whimsical illustrations day or night. Another unique feature is the box which can be used to prop and display cards for meditiation work, as a round-the-clock reminder of a fairie’s message to you, or as a unique frame for the enchanting art. Boxed set (47/8 x 4 7/8) includes 12 full-color, glow-in-the-dark cards and a 192-page, full-color companion guide |
|
|
Rockhand Sign $10 Rockhand Sign |
|
|
Girl Sign $10 Girl Sign |
|
|
Coolabear - Sign $10 Coolabear - Sign |
|
|
Warning Sign $10 Warning Sign |
|
|
Fiery Sign $10 Fiery Sign |
|
|
Sign Of Allah $10 Sign Of Allah |
|
|
Sikh Sign $6 Sikh Sign |
|
|
Rollin - Sign $6 Rollin - Sign |
Tags: design, sign deck, sign deck statement, sign deckstar, social, tools, twitter, web2.0